KTC 9.5sq Quick spinner BE3-Q

目次

1. To prevent over-tightening

The spring nut, which is used extensively on the YZF-R125 (5D7), will break if the tapping screw is over-tightened.
So, I now use this quick spinner / BE3-Q and handle / AB-53 as much as possible to prevent over-tightening.

This is a little different from the original application, but it is very useful.

2. Product description

1) Overview

スクロールできます
Manufacturer/brandKYOTO TOOL CO., LTD. / KTC
Parts Name9.5sq Quick spinner
Parts NumberBE3-Q
Country of originJapan
Date of purchaseCirca 2012
Where to buyWeb store
New/usedNew
Price buy [Yen]
Regular price [Yen]2,046
Evaluation

2) Appearance

<Wrench side>

<Socket side>

3) Uses and specification

① Uses

  • The tool can be fitted between the ratchet handle and the socket to enable fast turning of the socket.
  • The grip is shaped so that the angle of rotation can be easily recognized by touch in 90° increments, and the surface is marked in 30° increments to serve as a guide when tightening using the angle of rotation method.
  • The grip is made of resin and is lightweight.

I often use it with KTC’s hexagonal bit socket BT3-04S etc.

<Attached to BT3-04S

<Attached to BT3-04L

② Specification

Overall length29.7 mm
Outer diameterφ36 mm
Weight43 g (Actual measurements)

3. Product Review

1) Good points

  • Prevents damage to spring nuts.
  • When used with hexagonal bit socket BT3-04S, it fits in the palm of your hand, so you can work with one hand
  • After more than 12 years of use, the handle has been worn away, but it is still usable
  • The red color looks great and adds a nice accent.
  • Of course, it’s also very useful as an original fast turner.

2) Unsatisfied points

  • Grooves on the sides of the handles get dirty and are difficult to clean (not a problem in use).

4. Summary

They are indispensable for tightening tapping screws.
I have not broken a single spring nut since because I am aware of over-tightening.

Articles in which this product is mentioned:

よかったらシェアしてね!
  • URLをコピーしました!
  • URLをコピーしました!

この記事を書いた人

目次