August 2024– date –

1. Check drive sprocket wear In the maintenance record 'Inspection of delivered moto' I checked the driven sprocket, but I have not yet checked the drive sprocket.So, this time, at the same time as the maintenance record ‘How to remove s...

1. Install cleaned steps and pedals This is a continuation of the maintenance record "Check and Clean steps and pedals". A torque wrench is used extensively around the step and pedal area, as tightening torques are specified.The tighteni...

1. Remove parts for checking and cleaning This is a continuation of the maintenance record "How to remove steps and pedals". If you are riding your R125 and see any of the following signs, I recommend that you have your step pedals check...

1. Remove steps and pedals for cleaning When I was hanging up the bike cover, I suddenly found it on the steps and pedals area."There's quite a bit of grease on them…" If I put the bike cover on like this, the inside of the cover is goin...

1. Oil change while checking for oil leaks. In the maintenance record "Inspection of delivered moto" STEP 3-8, it was noticed that engine oil was leaking from the drain bolt area. ＜Engine oil leakage＞ Oil was also dripping onto the muf...