October 2024– date –

1. There are a few tips for installation as well. Here are some notes on installation that I have not noticed when removing it. If you have any of the following concerns about fitting rear cowls and panel etc., here are a few tips for yo...

1. Remove passenger brackets I never ride with two people.So, I decided to remove the passenger brackets and steps, which I never use. Removing the passenger brackets simplifies the area around the rear cowl and accentuates the sharpness...

1.Mudguard has holes in it I noticed this when I removed the mudguard (black plastic part on the underside of the rear cowl) in the maintenance records ‘How to remove rear cowls and panel etc.’. To my surprise, there are three holes in t...

1. To keep track of where parts have been removed and to prevent loss The R125 has a large number of cowls and panels, so many bolts, screws etc. are used to fix them in place.The number is, When side panels and cowls are removed: 37 Whe...

1. For removing push rivets Push rivets are used to secure the lower side cowl, mudguard and other parts of the YZF-R125 (5D7W).These can be removed by using this dowel pin punch to push in the middle pin of the push rivet. ＜Removing an...

1.Remove parts and apply ceramic coating A ceramic coating is a great way to keep your moto looking as good as possible for as long as possible.A ceramic coating will Longer-lasting gloss. dirt is easier to remove. So, cleaning afterward...