November 2024– date –

This is a continuation of the maintenance record ‘Replate tail tidy2【preparation】’. Finally, the tail tidy (R&G LP0162BK) is assembled. When installing the tail tidy, there is a point that we want to pay attention to so that it doe...

This is a continuation of the maintenance record 'Replace tail tidy 1【Removal】'. The tail tidy to be fitted is the R&G LP0162BK.This is not a bolt-on kit and the following must be prepared. Wiring modifications to the license plate...

At the time of purchase, the moto came with a one-off tail tidy fitted by the previous owner.This also included LED number lights and reflectors, which worked perfectly, but had the following problems. Number plate is improperly fitted. ...

1. Used to prevent rust. As I mentioned "Maintenance record", rust on the front fork inner tube can be a hassle.If the plating is broken even a little, the only thing you can do is slow down the progress. (Except for re-plating.) I chose...

1. To prevent scratches on the upper side cowl. The R125 (5D7) has a bracket on the outside of the upper side cowl to hold the side cover in place.This bracket is a problem, and when removing and installing the upper side cowl, I bump it...