Chassis-related– category –

Since the rear brakes were checked and cleaned, the front brake calipers should also be done, and the condition and thickness of the brake pads should be checked along with them. From this article you will learn the following. How to rem...

I cleaned the rear brakes, but the “squeaking” noise returned.So, I will replace the brake fluid this time.I noticed that it has been two and a half years since I took delivery of the car, but I had not changed the fluid during this time...

This is a continuation of the maintenance record “Check and clean rear brake1【Removal and clean】” Now that the parts have been cleaned, put them back together.Properly lubricate the brake pistons and grease brake calipers during instal...

Sometimes there is a strange “squealing” noise coming from the rear brakes.It doesn't start when the brakes are applied, but just before stopping, so people around me react to the sound and turn around.As it is very embarrassing, I decid...

Rust on front fork inner tubes is a nuisance.Once the plating has been broken, even slightly, the only thing left to do is to deal with it and slow its progress. (Except for re-plating.) In the maintenance record ‘Inspection of delivered...

1. Check drive sprocket wear In the maintenance record 'Inspection of delivered moto' I checked the driven sprocket, but I have not yet checked the drive sprocket.So, this time, at the same time as the maintenance record ‘How to remove s...