Electrical equipment– category –

This fourth installment covers the fabrication of a bracket for the drive recorder switch.To mount it in the location decided in the maintenance log “Drive Recorder Installation 1 [Mounting Considerations],” I focused on the following po...

In this third installment, I'll be fabricating brackets for the dashcam cameras. To mount them at the locations decided in the maintenance record Motorcycle Dash Cam Installation Part 1 - Planning the Setup, the brackets will be designed...

In this second installment, I'll be making the bracket for the dash cam main unit. ＜Location for the Dash Cam Main Unit＞ As decided in Maintenance record: Motorcycle Dash Cam Installation Part 1 - Planning the Setup, the unit will be p...

This guide covers how I went about installing the Mitsuba Sankowa dual-channel motorcycle dash cam (model EDR-21A). Whether you’re: Thinking about tackling the installation yourself Unsure where to place the cameras or switch Had a shop ...

I will summarize how to remove and install the meter unit. From the beginning, but I broke the threaded part when installing the meter unit.I will tell you at the beginning that there is a risk of breaking by removing and installing. By ...

In this fourth installment, I will install and connect the wiring prepared in the maintenance record “Install burglar Alarm3【Processing wiring】” to the moto body.In order to install the device and wiring inside the frame and cowl, I wi...

In this third installment, I will modify the wiring for the burglar alarm.The wiring for each wire is processed to the length determined in the maintenance record “Install burglar Alarms 1【Consider installation method】”. Although it ta...

In this second installment, I will fabricate a bracket for the main body of the burglar alarm.The bracket is placed across the engine control unit, and the main body is placed on top of it. Making the bracket is a bit time-consuming, but...

I have always wanted to protect my moto from mischief and theft, so I was interested in a security device.I looked on the Internet and learned that there was a theft alarm (Protec/CS-550M) that could be retrofitted, and I thought this wo...

I bought a retrofit burglar alarm and a drive recorder.Both require an electrical signal from the ignition switch OFF (ON), so the ignition power supply (hereinafter described as IG power supply) is taken out from the moto body. The foll...