Installation / replacement– category –

In this fourth installment, I will install and connect the wiring prepared in the maintenance record “Install burglar Alarm3【Processing wiring】” to the moto body.In order to install the device and wiring inside the frame and cowl, I wi...

In this third installment, I will modify the wiring for the burglar alarm.The wiring for each wire is processed to the length determined in the maintenance record “Install burglar Alarms 1【Consider installation method】”. Although it ta...

In this second installment, I will fabricate a bracket for the main body of the burglar alarm.The bracket is placed across the engine control unit, and the main body is placed on top of it. Making the bracket is a bit time-consuming, but...

I have always wanted to protect my moto from mischief and theft, so I was interested in a security device.I looked on the Internet and learned that there was a theft alarm (Protec/CS-550M) that could be retrofitted, and I thought this wo...

I bought a retrofit burglar alarm and a drive recorder.Both require an electrical signal from the ignition switch OFF (ON), so the ignition power supply (hereinafter described as IG power supply) is taken out from the moto body. The foll...

Although recent motorcycles are increasingly using LEDs for lights, the R125 (5D7)'s factory turn signals are bulbs (LEDs are optional).Perhaps because the 125cc model is an entry grade, it is difficult to spend money on details. Knowing...